This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.
Logic Machine Forum › LogicMachine eco-system › Hardware v
LSS100100 to LM5Lp2

Threaded Mode
LSS100100 to LM5Lp2
BMSimon Offline
Junior Member
Posts: 29
Threads: 11
Joined: Mar 2023
Reputation: 0
#1
05.02.2025, 09:41
Is it possible to make a backup of a LSS100100 and import it to a LM5Lp2 without any problems?

Best regards

Simon
Find
Reply
Daniel Offline
Administrator
Posts: 4894
Threads: 28
Joined: Aug 2017
Reputation: 222
#2
05.02.2025, 09:45
Yes but you need to make sure the firmware is equal or LM will have a newer version. It might be confusing as we use different but you can share which firmware you have and we will advice. You cannot upload backup from newer firmware to older, other way around is fine.
------------------------------
Ctrl+F5
Find
Reply
BMSimon Offline
Junior Member
Posts: 29
Threads: 11
Joined: Mar 2023
Reputation: 0
#3
05.02.2025, 10:27 (This post was last modified: 05.02.2025, 10:30 by BMSimon.)
Thank you
LSS100100 is version 3.0.0 HW: Wiser for KNX (i.MX6)
LM5Lp2 is version 20240426 LM5 Lite (i.MX6)
Find
Reply
Daniel Offline
Administrator
Posts: 4894
Threads: 28
Joined: Aug 2017
Reputation: 222
#4
05.02.2025, 10:31
It's fine
------------------------------
Ctrl+F5
Find
Reply
BMSimon Offline
Junior Member
Posts: 29
Threads: 11
Joined: Mar 2023
Reputation: 0
#5
05.02.2025, 10:35
Perfect, do I need to do the configuration or the project backup first?
Find
Reply
Daniel Offline
Administrator
Posts: 4894
Threads: 28
Joined: Aug 2017
Reputation: 222
#6
05.02.2025, 11:16
It's up to you. The System config is just system settings. You could probably set it manually. KNX settings are part of main backup.
------------------------------
Ctrl+F5
Find
Reply
BMSimon Offline
Junior Member
Posts: 29
Threads: 11
Joined: Mar 2023
Reputation: 0
#7
05.02.2025, 11:26
Got it.
Last thing, Touch on the LSS100100 is that the same as Mosaic on LM5Lp2? If so can i just make a backup of that also and import it on LM5Lp2?
Find
Reply
Daniel Offline
Administrator
Posts: 4894
Threads: 28
Joined: Aug 2017
Reputation: 222
#8
05.02.2025, 11:30
No it's not 100% the same. To be honest I'm not sure, SE made many modification to Touch(it is based on Mosaic) . You can export just Touch (from Touch app) and import to Mosaic to see.
Anything cloud related on LSS100100 will not work on LM. We use our own cloud which is totally different to the SE.
------------------------------
Ctrl+F5
Find
Reply


Forum Jump: