This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

knx/tp error
#5
(01.03.2018, 10:33)Daniel. Wrote:
(01.03.2018, 10:14)Gabi Wrote: Hi
Logic Machine 3, Firmware 20150917.

OK old one. Can you open it and check what is written on KNX chip? In this LM it will be Siemens and version can be 5.2 or 5.3.

as i know there was no TPUART 5.3 on LM3, only 5.2 was
Reply


Messages In This Thread
knx/tp error - by Gabi - 28.02.2018, 07:54
RE: knx/tp error - by Daniel - 28.02.2018, 10:03
RE: knx/tp error - by Gabi - 01.03.2018, 10:14
RE: knx/tp error - by Daniel - 01.03.2018, 10:33
RE: knx/tp error - by AEK - 01.03.2018, 11:47
RE: knx/tp error - by Gabi - 02.03.2018, 04:01
RE: knx/tp error - by Daniel - 02.03.2018, 09:51
RE: knx/tp error - by Gabi - 12.03.2018, 05:15
RE: knx/tp error - by Daniel - 12.03.2018, 08:31
RE: knx/tp error - by Gabi - 20.03.2018, 08:59
RE: knx/tp error - by Gabi - 22.03.2018, 07:08
RE: knx/tp error - by Daniel - 22.03.2018, 09:32
RE: knx/tp error - by Gabi - 27.03.2018, 05:21
RE: knx/tp error - by edgars - 27.03.2018, 06:33
RE: knx/tp error - by XSPA2474KW - 03.09.2018, 08:09
RE: knx/tp error - by DGrandes - 26.10.2020, 07:56
RE: knx/tp error - by Daniel - 26.10.2020, 08:30
RE: knx/tp error - by DGrandes - 27.10.2020, 12:11
RE: knx/tp error - by admin - 27.10.2020, 12:14
RE: knx/tp error - by DGrandes - 29.10.2020, 15:44
RE: knx/tp error - by AlexLV - 27.10.2020, 12:46
RE: knx/tp error - by admin - 27.10.2020, 12:56
RE: knx/tp error - by AlexLV - 27.10.2020, 13:03
RE: knx/tp error - by Hoang Hien - 01.10.2023, 08:53
RE: knx/tp error - by CristianAgata - 01.10.2023, 16:25
RE: knx/tp error - by Hoang Hien - 10.10.2023, 06:47
RE: knx/tp error - by Erwin van der Zwart - 01.10.2023, 09:37
RE: knx/tp error - by admin - 10.10.2023, 07:01
RE: knx/tp error - by Hoang Hien - 10.10.2023, 08:24
RE: knx/tp error - by Daniel - 10.10.2023, 09:26
RE: knx/tp error - by Hoang Hien - 10.10.2023, 12:02

Forum Jump: