Hi,
Thanks for the reply!
The idea is that the HMI touch screens will operate the local dimming directly to the PLC. But all Scene goes thru the LM. the reason for that is easy changing of scene values, and easy programing.
Regarding Bac0 and Bac1, im totally new to Bacnet, so this is very good information
Regarding using one or two LM, im not Shure what to do here, because the HMI will not communicate directly thru the LM to get to the PLC. Its only to run a scene, LM will then write to the PLC.
Edgars and Erwin what is your opinion? This project is on a big cruise vessel, so very important that it will work properly
BR Even Sundgot.
Thanks for the reply!
The idea is that the HMI touch screens will operate the local dimming directly to the PLC. But all Scene goes thru the LM. the reason for that is easy changing of scene values, and easy programing.
Regarding Bac0 and Bac1, im totally new to Bacnet, so this is very good information
Regarding using one or two LM, im not Shure what to do here, because the HMI will not communicate directly thru the LM to get to the PLC. Its only to run a scene, LM will then write to the PLC.
Edgars and Erwin what is your opinion? This project is on a big cruise vessel, so very important that it will work properly
BR Even Sundgot.