This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

PoE Doubts
#1
Hi, I have several questions about PoE power, I usually use a PoE injector from Ubiquiti reference POE-24-12W-G, in the specifications it says that it uses pins 4 and 5 as positive and (3,6) and ( 7,8) as negative, this injector is a passive PoE injector? If so, what do I have to look for when buying a PoE injector to work with the LM? I would also like to know what function have the jumpers that are next to the 24V input. Thank you very much.
Reply
#2
Hi, see this post: https://forum.logicmachine.net/showthrea...22#pid1322
You probably need POE-24-12W (not the gigabit model).
Jumpers can be used to disable PoE. By default they should be in PoE enabled position.
Reply


Forum Jump: