This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Modbus TCP coil issue
#1
Hi 
I've some trouble with a modbus profile. 
When I map a coil-register to a bool object this error message appears in log: 
   

All other registers, holdingreg, inputreg and discreteinput from device works, but not the coil.
This is the profile:
   

There are only two coils in the register on this device:
   

This is a modbus TCP-device, and LM5-version is 20180523.


Could anyone point me in the right direction here, or give me a feedback on any possible errors in the profile??

Eirik
Reply
#2
Install RC1 firmware http://forum.logicmachine.net/showthread.php?tid=1562
Reply


Forum Jump: