SNMP protocol in Logic Machine

[MarcusH]

Got it

Code:

res, err = walk('192.168.1.252', 'public', snmp.SNMPv1, '1.3.6.1.4.1.318.1.1.26.6.3.1.6')
log(res, err)

if type(res) == 'table' then

  voltage = res["1.3.6.1.4.1.318.1.1.26.6.3.1.6.1"]

log(voltage)
 
end

---

walk is needed when you want to finds all sub-OIDs within a sub-tree.
Have a look at this example:
https://forum.logicmachine.net/showthrea...51#pid9651
You just need to provide device IP and OID to group address mapping. Script will then handle reading.

 
Ahh okey, this is an way easier way then. Thanks