Blind control on Wiser for KNX via Enocean

[KNXUser]

Hi Daniel,

as i posted in my other thread
https://forum.logicmachine.net/showthrea...9#pid12449
the Enocean stick works only a few days and then i have to restart wiser.
I have several system messages in the wiser concerning the scripts for differentiaiton of shot and long button press.
The messages can bee seen in the picture attached and says for example: "*string: 32/1/7".
32/1/7 is the bit-object which is send by the Enocean profile when pressing the button for blind down and is the trigger for the script.
The text in my scripts is almost like you wrote me:

short = 6  -- Differentiation time short/long press in 100ms 
value = event.getvalue()
address=event.dst
log(address)
short = 6
if (value) then
    for i = 1, short, 1 do
        value = grp.getvalue(address)
        if (value == false) then
      grp.write('1/0/230', false) -- short time adress
          break
            end
    --  waiting time 0.1 seconds
        os.sleep(0.1)
    end
  value = grp.getvalue(address)
  if (value) then
    grp.write('1/0/229', false) -- long time adress
    end
end

Can you tell me, what the system message would tell me and what could be the solution?

Kind regards