This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

SL Schneider, other controller and MODBUS
#1
Hi,

tomorrow I will start new project where Schneider SpaceLynk will be used, We plan make  visu at SL. It should be connected to WAGO 750 over network using MODBUS protocol. To WAGO connected DALI ballasts and some inputs. Sorry, such concept not mine. I better use LM for that..

I need make 2-side communication, but unfortunately it will be my first project with MODBUS. 

Can you help a little with start steps? Devices are in one subnet, One I think should be Master? 

Who is more profi with MODBUS please help me how to start communication between devices.

Big thanks for any help.

Alex
Reply
#2
Hi
SL should be master and wago slave but other way would also work. Then you need to create profile for wago and use the mapper.
BR
Reply


Forum Jump: