This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

1wire to LM5Lite
#1
Hello!
I have a LM5Lite and a KNX home automation. I want to expand the network and use a few 1wire temperature sensors. I want the temperature at one of the sensors to be displayed on the knx thermostat display as well as the outside temperature.
I found various rs232 to 1wire adapters.
Is it possible to use an adapter? Can you help me with some advice?

[i]Thanks!![/i]
Reply
#2
Hi
The easiest for you would be just getting LM with 1 wire like this one
http://openrb.com/logicmachine5-power-dw1
BR
Reply
#3
USB<>1-Wire bridge DS9490R is also supported
Reply


Forum Jump: