This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Spikes in Tp load
#1
I was getting some spikes in the tp load. Group monitor in ETS is looking pretty normal and so does the objects in the monitor as well. 
What could make this behaviour happen.?
Using 2 ip gateway on main line 8 and 9. LM5 is connected to Line 8 on main as 8.0.8 as tp. 
Could it be easier to just read via IP?

   
   
Reply
#2
You have a lot of RX telegrams which means that they are not coming from LM but from somewhere else. You can use ETS or install LM monitor app to catch what causing so many telegrams: https://forum.logicmachine.net/showthrea...2#pid11872
Reply
#3
(12.03.2019, 07:58)admin Wrote: You have a lot of RX telegrams which means that they are not coming from LM but from somewhere else. You can use ETS or install LM monitor app to catch what causing so many telegrams: https://forum.logicmachine.net/showthrea...2#pid11872

Downloaded the monitor, but where do i install it.
Reply
#4
You have to manually upload to ftp apps. Paste it (unziped) to data folder.
------------------------------
Ctrl+F5
Reply
#5
(12.03.2019, 11:43)Daniel. Wrote: You have to manually upload to ftp apps. Paste it (unziped) to data folder.

If i was confused before, then i am even more now.  Smile
Reply
#6
Smile
Go to FTP and enable it and set 'apps' password.
Connect to FTP via using apps user and password
Then you will see some folders and copy this monitor folder in to data folder.
Go to home screen and open app.
------------------------------
Ctrl+F5
Reply
#7
(12.03.2019, 11:54)Daniel. Wrote: Smile
Go to FTP and enable it and set 'apps' password.
Connect to FTP via using apps user and password
Then you will see some folders and copy this monitor folder in to data folder.
Go to home screen and open app.

   

Uploaded via Filezilla. Could be that there are easier ways. But working now. 
Thanks for patience Daniel. 
Reply
#8
(12.03.2019, 07:58)admin Wrote: You have a lot of RX telegrams which means that they are not coming from LM but from somewhere else. You can use ETS or install LM monitor app to catch what causing so many telegrams: https://forum.logicmachine.net/showthrea...2#pid11872

   

Group monitor and the LM monitor app shows the same. Nothing that seems out of the ordinary. But keep getting these spikes. 
The picture is showing the ets group monitor at the same time as the spike. Group monitor showing 1,1 pr second and no repeats.
Reply


Forum Jump: