This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

DALI v.2 protocol
#1
Hi,

customer asked questions regarding LM DALI interface. I need fresh info. Does DALI interface support DALI v.2 protocol - multimaster device support and DALI sensors connection? If not - is planned to upgrade interface? I have genohm-scada-dali 20190123 library installed. Is it latest library?? If not, where possible download latest library?

BR,

Alex
Reply
#2
Internal gateways work in single master mode right now. DALIv2 can be supported but it will require a protocol change. CANx-DALI gateways have partial support for DALIv2 - you can receive data from other masters but it must be parsed manually via a script. Addressing for DALIv2 is not yet implemented. Right now we are focused on making a more or less complete solution for CANx-DALI then implement the same support for internal gateways.
Reply
#3
admin,

big thank for updates, will inform my customer, if possible will try to use standard RS485/DALI modules.

BR,

Alex
Reply


Forum Jump: