This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

SpaceLynk and Wiser For Knx BACnet release
#1
Hi all,

can you tell me which current firmware includes BACnet for SpacelYnk and Wiser For Knx?

Where can I download an official version ?




Thank's in advance for your answer.
All the best from France.
Reply
#2
All of them had it. Download it from se.com
Reply
#3
Ok ... BACnet server is native in SpaceLynk!
Thank you Daniel
Reply
#4
Hi,

Here you can find the latest FW for spaceLYnk:

HW1 (reset button on the back)

https://download.schneider-electric.com/...W_1_X_X-sL

HW2/3 (reset button on the front)

https://download.schneider-electric.com/...W_3_X_X-sL

BR,

Erwin
Reply
#5
Dear Erwin,

I installed the package "Wiser_for_KNX-2.4.0_hw1.xx.img" on my Wiser For Knx  "2.3.0", and then, after a reeboot, it's always the same "2.3.0" release number writed à the botton left of the creen !

PS: after new firmware upload : 2.3.0 / Flashsys v2 / ©2008-2018

Any reasons ?
Thank's in advance...
Reply
#6
clear browser cache
Reply
#7
same thing...
The "system > Firmware Upgrade" indicate "SW 2.3.0" !
Reply
#8
card in read only mode?
Reply
#9
Which card ? I have already made several firmware updates without any problem...
Reply
#10
Change any system settings, press sync and then reboot. Check if this what was changed is still there.
Reply


Forum Jump: