This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

LED strip DMX
#1
Hi,
I need programing a dmx driver with a white LED strip. I need the LED strip to light diode to diode and past some seconds go to turn off diode to diode.
I have a LM Lite 5, a white LED strip and this DMX driver (https://www.amazon.es/gp/product/B00Q1N1...UTF8&psc=1)

I need make somethin like this (https://youtu.be/2GBWmYc__aM?t=13)
Thanks
Reply
#2
Do you have only one DMX driver? If so then this won't work because it can only control 3 separate channels. If you want an animated LEDs you need WS2811 or similar LED strip and a controller suitable for this type of LEDs.
Reply
#3
Yes, I have only one DMX driver. But the LED strip is only white color, not RGB. I need other DMX driver too?
Reply
#4
The only thing you can do with a 3 channel dimmer is control 3 separate strips. But you can only dim the whole strip at once not separate LEDs.
Reply


Forum Jump: