This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Paradox EVO192 integration
#4
Hi, thank you for this script! I'm investigating the best possible way to integrate a security system with KNX in my next project. Satel has INT-KNX-2, which is great, but it has certain limitations (e.g. only 64 addresses). There are some pricey 3rd party modules for DSC. And there is Paradox with PRT3 and pricey 3rd party modules again, or using Logic Machine alternatively. The last option I like the most, because I'll probably put a Logic Machine into the project anyways.

Two questions:
1. Does this script work with the newer Paradox serial module? PRT3 is now discontinued and replaced.
2. Are zone changes reported imidiately? For example if a motion sensor detects motion, is this reported on the same second?
Reply


Messages In This Thread
Paradox EVO192 integration - by edgars - 13.11.2019, 09:00
RE: Paradox EVO192 integration - by gtsamis - 25.03.2022, 02:02
RE: Paradox EVO192 integration - by mishoboss - 01.12.2020, 21:05
RE: Paradox EVO192 integration - by mishoboss - 26.06.2021, 05:27
RE: Paradox EVO192 integration - by Angeles - 27.10.2021, 11:41
RE: Paradox EVO192 integration - by admin - 22.02.2022, 12:09
RE: Paradox EVO192 integration - by admin - 22.02.2022, 15:16
RE: Paradox EVO192 integration - by JMemphix - 10.10.2022, 00:10
RE: Paradox EVO192 integration - by mishoboss - 22.04.2024, 08:47
RE: Paradox EVO192 integration - by Daniel - 22.04.2024, 08:54

Forum Jump: