This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Root access.
#1
Hi,

Does anyone know кщще password? I need to get into the shell, because there are errors on the file system and they need to be fixed. 
Code:
Feb 5 18:10:16 Podkova-evika kern.info kernel: [ 12.626021] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc
Feb 5 18:10:16 Podkova-evika kern.info kernel: [ 12.624906] EXT4-fs (mmcblk0p3): recovery complete
Feb 5 18:10:13 Podkova-evika user.info sysinit: /dev/mmcblk0p3: ********** WARNING: Filesystem still has errors **********
Feb 5 18:10:13 Podkova-evika user.info sysinit: e2fsck: unable to set superblock flags on /dev/mmcblk0p3
Feb 5 18:10:12 Podkova-evika user.info sysinit: Run journal anyway? yes
Feb 5 18:10:12 Podkova-evika user.info sysinit: Superblock needs_recovery flag is clear, but journal has data.
Feb 5 18:10:10 Podkova-evika kern.info kernel: [ 7.034926] fec 800f0000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Feb 5 18:10:09 Podkova-evika user.info sysinit: /dev/mmcblk0p3: recovering journal
Feb 5 18:10:08 Podkova-evika user.info sysinit: e2fsck 1.44.1 (24-Mar-2018)
This error leads to the fact that scripts and other settings are not saved :-(

Anton
Reply
#2
I strongly suggest replacing SD card
Reply
#3
(05.02.2020, 18:42)admin Wrote: I strongly suggest replacing SD card
Hi!

My hardware HW: Reactor v1 (i.MX28). Is the SD card installed inside?


Anton
Reply
#4
Yes, you need to open the enclosure to replace it. I recommend using industrial cards.
Reply
#5
(07.02.2020, 06:53)admin Wrote: Yes, you need to open the enclosure to replace it. I recommend using industrial cards.
This is new information for me :-)
Thank you!



Best regards,
Anton
Reply


Forum Jump: