This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Text Visualitzation
#1
Is it possible with the viewer to display a text from a KNX address value?

For example from 1 byte KNX address:
   value = 0   --> text = auto
   value = 1   --> text = heating
   value = 2   --> text = cooling

Thanks!
Reply
#2
(17.04.2016, 07:53)jmir Wrote: Is it possible with the viewer to display a text from a KNX address value?

For example from 1 byte KNX address:
   value = 0   --> text = auto
   value = 1   --> text = heating
   value = 2   --> text = cooling

Thanks!

If I understand you well, you must use a function "Custom values" in "Objects" tab and in every object there is such option.
Reply
#3
(17.04.2016, 08:55)buuuudzik Wrote:
(17.04.2016, 07:53)jmir Wrote: Is it possible with the viewer to display a text from a KNX address value?

For example from 1 byte KNX address:
   value = 0   --> text = auto
   value = 1   --> text = heating
   value = 2   --> text = cooling

Thanks!

If I understand you well, you must use a function "Custom values" in "Objects" tab and in every object there is such option.


It's just I needed! Thanks!
Reply


Forum Jump: