This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

CAN-UIO8-LoRa
#1
Hi,
I'm testing a CAN-UIO8-LoRa of my last order, but I think that the inputs is not working.
I attach the simple project that the input 1 turn on and off the output 2.
I did the same thing in CAN-UIO16 and everything works fine.

Best regards,
Reply
#2
upgrade firmware and check again
https://dl.openrb.com/canx/
------------------------------
Ctrl+F5
Reply
#3
(03.06.2020, 11:22)Daniel. Wrote: upgrade firmware and check again
https://dl.openrb.com/canx/
Hi Daniel,
Thank you. It's already working. :-)

Best regards,
Reply


Forum Jump: