This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

PT1000
#1
Hi guys, 

i was wondering if you could help me to find suitable PT1000 sensor with pockets which I could use with 8PT CANx?

We will need to extend sensor for about 40-60m.
Reply
#2
PT1000 won't provide reliable readings with such long cables. The cable should be as short as possible, preferably no more than several meters.
Consider using these devices instead of CANx 8PT: https://openrb.com/canx-1-x-6a-relay-1-x...sor-input/ This way you can put them much closer to the measurement point.
Reply
#3
Thank you for that. Any guidance on the sensors and pockets ?
Reply
#4
Thermokon has a wide range of sensors. They also have sensors with Modbus on board. These sensors can be connected directly to LM via RS-485.
Reply


Forum Jump: