23.06.2021, 16:47
(21.06.2021, 06:36)admin Wrote: Both devices can be integrated but keep in mind that the current dongle cannot handle more than 15 ZigBee devices connected to it. Connecting more than 15 can brick the dongle and it must be re-flashed using an external programming device. We are working on an improved ZigBee-USB interface with an external antenna. It's based on a newer chip and can handle a lot more connections.
I only have 11 devices in my system so I think I'm ok.
The namron remote i mentioned shall also support touchlink to devices via group, and i found that the only "normal" way of assigning the buttons on the remote is direct pairing to devices alredy in the network. But I have trouble to find out how to initiate touchlink commissioning from LM. Tried the pair function per unit, without any luck.
The schuko plugs is still unsolved also.
I guess its misses some profile info that have to be implemented in the zigbee app. Is there a way for adding this myself, or is the development not ready for this step? (roadmap in zigbee development?)
I'm happy to test and help out in testing at my system. I'm also intreressted in new usb with external antenna, as my LM is installed in the steel cabinet alongside my fuses in the basement, with a lot of concrete around. I therefore use schuko plugs as repeaters to help the zigbee mesh network.