This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Zigbee gateway integration
@clue9, you didn't mention that the full manufacturer name for this device is "Develco Products A/S" so the previously added profile did not work for it. The next version will have this fixed.
Reply
Could you please add support of this device?

Code:
Manufacturer: frient A/S
Model: AQSZB-110

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 49353
Input clusters
- Identify (3)
- Scenes (5)
- OnOff (6)

Endpoint 38
Profile: 260
Input clusters
- Basic (0)
- PowerCfg (1)
- Identify (3)
- PollCtrl (32)
- MsTemperatureMeasurement (1026)
- MsRelativeHumidity (1029)
- 1070
- 64515
Output clusters
- Identify (3)
- Time (10)
- Ota (25)
Reply
Hello.


Is SONOFF ZigBee 3.0 USB Dongle Plus with a Z-Stack coordinator (CC1352P2_CC2652P_launchpad_*.zip v 20220219) supported out of the box with Zigbee app v20220322? Zigbee has a red dot in the status bar.



As I understand, that dongle uses a different serial port /dev/ttyUSB0 (instead of /dev/ttyACM0 for CC2531). Is it possible to change the port or modify the Zigbee app configuration programmatically?


Thank you in advance!

HW: LM5 Lite + Ext (i.MX6) SW: 20211215 | Serial port list with a connected dongle /dev/ttyUSB0 ITead - Sonoff Zigbee 3.0 USB Dongle Plus



Code:
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.041921] usb 1-1: cp210x converter now attached to ttyUSB0
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.041388] cp210x 1-1:1.0: cp210x converter detected
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038393] usb 1-1: SerialNumber: ec13ecb57829ec119dd66d7840c9ce8d
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038381] usb 1-1: Manufacturer: ITead
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038369] usb 1-1: Product: Sonoff Zigbee 3.0 USB Dongle Plus
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038357] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 13 13:00:57 LogicMachine kern.info kernel: [ 241.038330] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60
Apr 13 13:00:56 LogicMachine kern.info kernel: [ 240.895497] usb 1-1: new full-speed USB device number 3 using ci_hdrc
Reply
Our new ZigBee interface is based on a similar hardware but it has a different USB product id which app uses to detect the adapter. You can try changing the product id from ea60 to bee0 on Linux using this tool: https://github.com/DiUS/cp210x-cfg
Keep in mind that this a write-once operation so double check everything before changing the parameter.
Reply
(14.04.2022, 12:44)admin Wrote: Our new ZigBee interface is based on a similar hardware but it has a different USB product id which app uses to detect the adapter. You can try changing the product id from ea60 to bee0 on Linux using this tool: https://github.com/DiUS/cp210x-cfg
Keep in mind that this a write-once operation so double check everything before changing the parameter.

Thank you, everything works fine!

P.S. Device is based on a new CP2102N-GQFN28 chip. CMD tool working code is https://github.com/ilutchenko/cp210x-cfg...id-pid-set


       
Reply
Hi,

Is the new zigbee usb stick (with external antenna) already up for purchase and if so can I order one.

Best Regards,
Tigi
Reply
We have fully working prototypes at the moment. Production devices should be ready in two months or so.
Reply
It would be nice if you add this to the Zigbee collection:

Aqara Mini Switch

Manufacturer: LUMI
Model: lumi.remote.b1acn01

Device type: End device
Power source: Battery
Receive when idle: No

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- MultistateInput (18)
- Identify (3)
Output clusters
- Basic (0)
Reply
@Rune, it can be added but only with raw value reporting. It sends a certain number for single/double press and hold/release events. A small event script will be needed to perform required actions based on the switch action number.
Reply
Hi guys! Is this gateway supported by LM5?

https://phoscon.de/en/conbee2

Thanks for answers
Reply
We don't have plans to support third-party adapters. Some might work if they are based on the same hardware as ours but this is not guaranteed. conbee has a different protocol so it's not supported.
Reply


Forum Jump: