Zigbee gateway integration

[tigi]

I noticed that the Active Power measurement of my Aqara Zigbee plugs is not working anymore, however I don't know for how long that is. The On/Off command is working though.

Also the zigbee device information of the Aqara plug shows in it's profile Electrical Measurement and Activepower.

Code:

Manufacturer: LUMI
Model: lumi.plug.maeu01

Device type: Router
Power source: Mains
Receive when idle: Yes

Endpoint 1
Profile: 260
Input clusters
- Basic (0)
- DeviceTempCfg (2)
- Identify (3)
- Groups (4)
- Scenes (5)
- OnOff (6)
- Alarms (9)
- SeMetering (1794)
- HaElectricalMeasurement (2820)
Output clusters
- Time (10)
- Ota (25)

Endpoint 242
Profile: 41440
Output clusters
- GreenPwr (33)

Reported attributes
- activepower: 0.1
- onoff: true
- powerdivisor: 1000
- powermultiplier: 1

However the logs show something strange "unsupported attribute", but maybe this is not related.

Code:

2022-06-29 12:59:06    ZB: packet from 54ef4410003a6b1e:
{ FrameControl = [ "FrameTypeGlobal", "DirectionFromServer", "DisableDefaultResponse" ], TransactionSequenceNumber = 66, GeneralCommandFrame = { CommandIdentifier = "ReadAttributesResponse", ReadAttributesResponse = { ReadAttributeStatusRecords = [ { AttributeIdentifier = 1024, Status = "UNSUPPORTED_ATTRIBUTE" }, { AttributeIdentifier = 769, Status = "SUCCESS", Attribute = { Type = "uint24", Value = 1 } }, { AttributeIdentifier = 770, Status = "SUCCESS", Attribute = { Type = "uint24", Value = 1000 } } ] } } }

I also tried by removing the device and re-adding is, but Active Power keeps at 0.0W
I'm running on Zigbee v20220322 and Logicmachine SW 20211215
Can you have a look? Thanks!