Zigbee gateway integration

[admin]

You can also perform RS232 self-test. Remove the ZigBee app, connect RS232 RX/TX on LM together and run this script once. You will see the result in the Alerts tab.

Code:

port = require('serial').open('/dev/RS232')
str = '1234567890'
port:flush()
  
for i = 1, 100 do
  port:write(str)
  res = port:read(#str, 1)

  if not res or res ~= str then
    fail = true
    break
  end
end

alert(fail and 'ERROR' or 'OK')