This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

CANx address is reset
#1
Good afternoon. Can anyone come across a problem like mine. The addresses on the CANx UIO16 and CANx UIO8 blocks are periodically reset. In this situation, the address UIO8 (8 Universal IO ports + LoRa) flew off and became 0.1, and before that the address of the UIO16 blocks was reset a little earlier. What could be problematic?

Attached Files Thumbnail(s)
       
Reply
#2
This is a hardware issue. Please contact us via e-mail for a replacement.
Reply
#3
(30.11.2021, 12:53)admin Wrote: This is a hardware issue. Please contact us via e-mail for a replacement.
Thanks. I wrote to support
Reply


Forum Jump: