This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Mosaic Access
#1
Hello

I am using mosaic 3.0, but I have a problem with End User viewing.
If I don't give full access the user can't see anything.

HW: LM5 Lite (i.MX6)
SW: 20210510

Access via dyndns, do I have to use the cloud?
Where am I wrong?

thank you very much
Reply
#2
Via port forward it still should work. Can he access it locally?
From outside you should use cloud for security reasons.
------------------------------
Ctrl+F5
Reply
#3
(09.08.2021, 08:44)Daniel. Wrote: Via port forward  it still should work. Can he access it locally?
From outside you should use cloud for security reasons.

I am connected with Zerotier on the device but if I have partial access it does not work.

From outside, then I must necessarily use the cloud and register a user on it, where can I find a configuration guide for the new cloud?

Thanks Daniel for the support
Reply
#4
https://forum.logicmachine.net/showthrea...9#pid21069
------------------------------
Ctrl+F5
Reply


Forum Jump: