This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Wiser: modbus rtu write to knx tp
#1
Hello there,

Is there anyway to send to knx bus tp all the values of modbus rtu? Not only when value changes

Thank you!
Reply
#2
If you don't touch the delta then all will be sent. You can easily flood the bus this way with many registers.
------------------------------
Ctrl+F5
Reply
#3
(16.09.2021, 09:29)Daniel Wrote: If you don't touch the delta then all will be sent. You can easily flood the bus this way with many registers.

I really need that certain registers always be sent to the bus, regardless of the delta.
Reply


Forum Jump: