This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

spaceLYnk as KNX device in ETS
#1
Hello All!

I want to add spaceLYnk as a normal device to a KNX project. 
To set up routing tables between IP routers. 

How to do it right?

regards!
Reply
#2
SL does not have its own ETS application but you can add any other IP router in the place where SL will be connected. You can then export filter table from ETS and paste it to SL.
------------------------------
Ctrl+F5
Reply
#3
Thanks.

Does SL have the ability to import filter tables?
Reply
#4
If you use an Ip router in the ETS in place where SL will be you can then right click on it and Preview filter table. You can copy it and paste it to SL where the filter table is. It will automatically put all group addresses.
------------------------------
Ctrl+F5
Reply


Forum Jump: