This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Problems with script editing
#1
Hi, I have LM5 Reactor Lite (SW: 20180828) in operation since 2019. Some days ago I met problem with script editing. When I try to edit script by pressing of corresponding icon in "Editor" column I receive empty new screen. In the same time scripts operate normally. Also FB Editor icon is disappeared from the main screen. Deinstall/Install procedure did not help me. There were no these problems one month ago. 
Could you advice me hove to overcome these problems? Thnx! KR Oleg
Reply
#2
Sounds like an micro SD card issue. Make a backup and replace the card. Follow this guide on how to flash recovery firmware: https://openrb.com/reflash-logicmachine3...-software/
Reply
#3
(29.08.2022, 06:27)admin Wrote: Sounds like an micro SD card issue. Make a backup and replace the card. Follow this guide on how to flash recovery firmware: https://openrb.com/reflash-logicmachine3...-software/

Hi, OK. Thnx. I'll try, but it will be the 3rd microSD replacement on this site that too far from me now :-(  
May be exist additional checking to identify and resolve this problem ? Thnx a lot!
Reply
#4
Use a higher quality card - either industrial or high endurance. Don't use scripts that constantly write to the card (e.g. log export to local FTP).
Reply


Forum Jump: