This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Wiser For KNX LED1 blink LED2 off
#1
I have a problem with my wiser for knx. After a power outage, i can't access to the device anymore. I tried removing the sd card and formating with a recovery file. LED1 is blinking and LED2 is off. A small red led inside device is also blinking. Any ideas?
Reply
#2
After loading recovery image did you try going to 192.168.0.10 and loading final firmware? You may need to clear the browser cache.
------------------------------
Ctrl+F5
Reply
#3
(15.11.2021, 17:53)Daniel Wrote: After loading recovery image did you try going to 192.168.0.10 and loading final firmware? You may need to clear the browser cache.

Sorry i am an idiot for not trying that before posting... now it is working. Thank you!
Reply


Forum Jump: