This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Airzone Modbus
#7
The addresses in the manual are in hexadecimal. You can use calculator in programmer mode to convert hex to decimal. The bitmasks are hexadecimal but can be decimal too, this does not matter. Just set the required bits to 1 and you will get the required value, for example bits 4-6 is 1110000 (right-most bit is bit number 0) which is 0x70 in hex or 112 in decimal.

Status objects they are not really needed because only one group address can be mapped to each Modbus register.
Reply


Messages In This Thread
Airzone Modbus - by davidchispas - 09.03.2022, 18:38
RE: Airzone Modbus - by admin - 10.03.2022, 10:55
RE: Airzone Modbus - by davidchispas - 10.03.2022, 11:56
RE: Airzone Modbus - by Domoticatorino - 11.03.2022, 13:11
RE: Airzone Modbus - by admin - 11.03.2022, 13:57
RE: Airzone Modbus - by davidchispas - 14.03.2022, 11:47
RE: Airzone Modbus - by admin - 14.03.2022, 12:10
RE: Airzone Modbus - by davidchispas - 19.04.2022, 07:50
RE: Airzone Modbus - by admin - 19.04.2022, 08:00
RE: Airzone Modbus - by davidchispas - 27.04.2022, 10:11
RE: Airzone Modbus - by Domoticatorino - 01.03.2024, 14:14
RE: Airzone Modbus - by Daniel - 01.03.2024, 14:17
RE: Airzone Modbus - by Domoticatorino - 01.03.2024, 14:29
RE: Airzone Modbus - by Daniel - 01.03.2024, 14:33

Forum Jump: