23.02.2017, 17:41
You can check it's properlly detected in LM.
For this go in Configuration / System / status / system logs.
Then plug you USB stick.
You should see couples of lines that look like this:
If it does, then open open status / system status, and click on serial port.
You should see a line that corresponds to the ttyACM from the syslog.
If you see the line. Means you stick is recognize by the system. and the issue comme probably from the widget.
Did you try to uninstall and reinstall the widget?
For this go in Configuration / System / status / system logs.
Then plug you USB stick.
You should see couples of lines that look like this:
Code:
cdc_acm 1-1:1.0: ttyACM*: USB ACM device
usb 1-1: SerialNumber: xxxxxxxxxx
usb 1-1: Manufacturer: xxxxxx
usb 1-1: Product: xxxxxxxxx
usb 1-1: New USB device strings: Mfr=x, Product=X, SerialNumber=x
usb 1-1: New USB device found, idVendor=xxxx, idProduct=xxxx
usb 1-1: new full-speed USB device number x using ci_hdrcIf it does, then open open status / system status, and click on serial port.
You should see a line that corresponds to the ttyACM from the syslog.
If you see the line. Means you stick is recognize by the system. and the issue comme probably from the widget.
Did you try to uninstall and reinstall the widget?