Zwave - Fibaro Motion Sensor

[baggins]

The dongle is detected by LM.

System log:

Code:

Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.341259] usb 1-1: cp210x converter now attached to ttyUSB0
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.340399] cp210x 1-1:1.0: cp210x converter detected
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.330921] usb 1-1: SerialNumber: 0001
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.330891] usb 1-1: Manufacturer: Silicon Labs
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.330859] usb 1-1: Product: CP2102 USB to UART Bridge Controller
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.330818] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.330752] usb 1-1: New USB device found, idVendor=10c4, idProduct=ea60
Feb 23 22:33:58 Logic Machine kern.info kernel: [442381.192813] usb 1-1: new full-speed USB device number 5 using

Serial ports:

Code:

/dev/ttyUSB0   Silicon Labs - CP2102 USB to UART Bridge Controller

Uninstalled and re-installed the app.
Started the daemon, no result...

No messages in the system log.
Is there any other log that might show what is going on?