This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

SL ping but can't open the webpage
#1
Hello 
I connected directly on the SL, it's ping but the webpage didn't open!
Best Regards,
Reply
#2
Try rebooting it, what does the LEDs says?
------------------------------
Ctrl+F5
Reply
#3
(18.05.2022, 11:47)Daniel Wrote: Try rebooting it, what does the LEDs says?

Tried, nothing happened
Light1 green plinking
Light2 green fixed
Best Regards,
Reply
#4
Few options:
1. Something got corrupted in system files. Try connecting with url to a specific page in LM like IP/scada-main
2. Check for duplicated IPs on the network.
3. Try enabling temporary mode, press and hold reset button for 10sec. LED will start flash red. IP will change to 192.168.0.10
------------------------------
Ctrl+F5
Reply


Forum Jump: