This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

Trends in Mosaic 3.0
#1
Hello,

I have some trends in mosaic 3.0
It seems that the timestamp for the loggings are wrong.
A logging that was done 08:00 today are shown at time 10:00 in the trend.
The trend logs at http://192.168.xxx.xx/scada-vis/trends has the correct time.
The time-zone settings in LM5 are correct.

Any suggestions?
Reply
#2
What is your time-zone?
------------------------------
Ctrl+F5
Reply
#3
It's Europe/Oslo
Reply
#4
What is the timezone set on the device you are using to see the trends?
------------------------------
Ctrl+F5
Reply
#5
It's the same timezone. UTC+1
Reply
#6
It was a bug, update Mosaic.
------------------------------
Ctrl+F5
Reply
#7
Thank you Daniel, it works nowSmile
Reply
#8
Hi Daniel,
is it possible that after update mosaic trend (on mosaic) shows always 0. In trend log app works fine.
Best regards Cristian
Reply
#9
Works fine for me, which firmware are you using?
------------------------------
Ctrl+F5
Reply
#10
(13.07.2022, 15:20)Daniel Wrote: Works fine for me, which firmware are you using?

20211215
Reply
#11
Send me your backup to PM
------------------------------
Ctrl+F5
Reply
#12
(13.07.2022, 15:25)Daniel Wrote: Send me your backup to PM

Done
Reply
#13
Your backup works fine. Try reboot and clear browser cache just in case.
------------------------------
Ctrl+F5
Reply
#14
(13.07.2022, 15:40)Daniel Wrote: Your backup works fine. Try reboot and clear browser cache just in case.

Hi Daniel,
I've already done both, but nothing it'is changed. This evening I will try to ask at the client if the app works fine.
Best regards Cristian
Reply
#15
Is this locally or in cloud?
------------------------------
Ctrl+F5
Reply
#16
(13.07.2022, 15:46)Daniel Wrote: Is this locally or in cloud?

I'm working with zerotier

Hi Daniel.
I've tried with Safari, Mozilla and Chrome same problem.
Best regards Cristian
Reply
#17
Hi Daniel,
problem solved....... It was my fault...... after  firmware update LM lost NTP server. Now I have fixed and it works again. Sorry again.
Best regards Cristian
Reply


Forum Jump: