SONOS app

[ivanposada]

Hi,

Just tested loadplaylist, loaduri and playuri and all 3 are working, after loadplaylist and loaduri you need to send the play command, playuri starts playing directly.

I noticed you use UUID, i tested with IP, are you sure the auto discovery has run once in the app (conversion from UUID or name to IP is based on auto discovery result table from storage)

BR,

Erwin

Hi Erwin,

I tested with IP instead UUID and is the same...

I send you some attachments that recreates the problems:

LOADPLAYLIST: see loadplaylist.jpg

PLAYURI: when i am listening a radiostation with an empty queue (see Playing radiostation with empty queue.jpg), and then i execute PLAYURI

Code:

http://192.168.0.91/apps/data/sonos/sonos.lp?action=playuri&ip=192.168.0.14&listtype=favorites&listnumber=5

the list number 5 is loaded in queue but the queue appears "not in use" and the radiostation continue playing (see Playuri after radiostation.jpg)

You say that the command playuri starts playing directly, but it don't start. If i send a PLAY command, no action is executed in Sonos, because it is playing radiostation.

LOADURI: After execute this command:

Code:

http://192.168.0.91/apps/data/sonos/sonos.lp?action=loaduri&ip=192.168.0.14&listtype=favorites&listnumber=5

No changes in the queue (see after loaduri.jpg)

NOTE: Playuri works perfectly when the queue "is in use" before sending the command. Maybe missing a command to put the queue "in use" - "not in use" ??

Thanks,

Iván