This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

IP routing through ZeroTier
#1
Hi!

Is there a way to enable KNX IP routing traffic through zerotier to connect remote locations together?
Reply
#2
You can do it via our cloud. Add two LMs to the same network by using same string(you will need to manually accept second LM) then tag objects which you want to pass trough lmcloud on both devices and then they will work in sync.
------------------------------
Ctrl+F5
Reply
#3
(21.09.2022, 08:05)Daniel Wrote: You can do it via our cloud. Add two LMs to the same network by using same string(you will need to manually accept second LM) then tag objects which you want to pass trough lmcloud on both devices and then they will work in sync.

Hi Daniel. What do you mean by "tag objects"?
Reply
#4
All objects with lmcloud tag are exported to cloud. You can use this to exchange values between several LMs through our cloud.
Reply
#5
(25.11.2022, 07:22)admin Wrote: All objects with lmcloud tag are exported to cloud. You can use this to exchange values between several LMs through our cloud.

Great. Thank you.
Reply


Forum Jump: