This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

LogicMachine5 Reactor IO
#1
LogicMachine5 Reactor IO is all-in-one cross-standard controller uniting in one device gateway functionality, cloud service integration, complex network logic engine, easy-to create visualization platform, IP Router, I/Os and much more.

Hightlights:           
  • 24 I/O ports
  • LM5 Reactor IO has built-in KNX TP1, EnOcean bi-directional interface (optional), two serial interfaces
  • Power-over-Ethernet powering
  • Application development and application store
  • Cloud ready device with Microsoft Azure, Amazon Web Services and other services supported
  • Gateway and uniform way of control of KNX, ModBus RTU/TCP, BACnet IP, EnOcean (optional), DMX, M-Bus, GSM and more
  • Unlimited scenario and logic engine
  • Unlimited visualization platform for PC and for touch devices
  • Size: 6 DIN units
  • Remote KNX bus control and KNX device reprogramming
  • Object logging with trends support and data exporting to external servers
  • Optional 3x more powerful CPU than all previous LogicMachine versions
[Image: LM5RIOE_R_EMBS_v1.1-300x237.png]

See here i.MX28 (CPU of LM2, LM3, LM4) and i.MX6 (optional 3x speed CPU for LM5 series devices) comparison tests: https://openrb.com/imx28-vs-imx6-cpu-tes...icmachine/
Here is more information on LM5 Reactor IO: http://openrb.com/logicmachine5-reactor-io/ 
LM comparison table: https://openrb.com/wp-content/uploads/2016/10/LM_comparison_table_12.10.2016.pdf
Reply
#2
Hi, is there a new firm available for this team?
Reply
#3
Newer from this?
https://forum.logicmachine.net/showthread.php?tid=2313
------------------------------
Ctrl+F5
Reply
#4
(05.05.2020, 10:15)Daniel. Wrote: Newer from this?
https://forum.logicmachine.net/showthread.php?tid=2313


which firmware corresponds to it? I have tried to install several and they give me an error.

This firm loads it but I lose outputs in the configuration

LM5 Power Reactor IO: https://dl.openrb.com/lm-19-imx6/lm5ra-20191015.img
Reply
#5
This is the fw, did you clear the cache ?
------------------------------
Ctrl+F5
Reply
#6
Try this FW: https://dl.openrb.com/lm-19-imx6/lm5m3ex-20191015.img
Reply
#7
(05.05.2020, 10:42)admin Wrote: Try this FW: https://dl.openrb.com/lm-19-imx6/lm5m3ex-20191015.img

Hello, I would like to update the firm again. Can you confirm which one I should use on this device? Thanks
Reply
#8
This one: https://dl.openrb.com/lm-21-imx6/lm5m3ex-20211014.img
Reply


Forum Jump: