24.10.2023, 23:02
Dear Admin,
I tried again to use LM5 to send switch on/off signal to HDL IP unit (IP Add.=192.168.1.37, Subnet=1 Device=0).
The HDL device (Subnet=1 Device=61) is 8 channels switch module, which also connects to HDL IP unit.
The script user.hdl is copied from example(openrb.com) , and "require('crc16')" is replaced by "crc16 = require('encdec').crc16"
The event-based script also set up according to example(openrb.com) .
14/0/220 is created to test the script.
When I turn on 14/0/220, the following error happens
User library hdl:30: bad argument #1 to 'pdecode' (expected 1 argument)
stack traceback:
[C]: in function 'pdecode'
User library hdl:30: in function 'init'
User library hdl:99: in function 'encode'
User library hdl:137: in function 'chanreg'
I don't know what is the root cause and how to slove this problem
.
I tried again to use LM5 to send switch on/off signal to HDL IP unit (IP Add.=192.168.1.37, Subnet=1 Device=0).
The HDL device (Subnet=1 Device=61) is 8 channels switch module, which also connects to HDL IP unit.
The script user.hdl is copied from example(openrb.com) , and "require('crc16')" is replaced by "crc16 = require('encdec').crc16"
The event-based script also set up according to example(openrb.com) .
14/0/220 is created to test the script.
When I turn on 14/0/220, the following error happens
User library hdl:30: bad argument #1 to 'pdecode' (expected 1 argument)
stack traceback:
[C]: in function 'pdecode'
User library hdl:30: in function 'init'
User library hdl:99: in function 'encode'
User library hdl:137: in function 'chanreg'
I don't know what is the root cause and how to slove this problem
.