This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

System monitoring
#1
Hi
There has been written about System monitoring function in the LM5 manual at page 158 poing 9.15.
But I can't find this option. Where is it available in the System menu?

Thank you.

Attached Files Thumbnail(s)
   
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply
#2
This feature has been removed/replaced with another built-in monitoring application which is not user-configurable.
Reply
#3
Does the built-in monitoring work? Because a week ago my LM died and it wasn't restarted.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply
#4
This can indicate a hardware problem. Please contact us by e-mail so we can arrange a replacement.
Reply
#5
Hi Admin
Thank you for your help.
It happened only once after I had changed KNX security settings (details see here http://forum.logicmachine.net/showthread.php?tid=685).
I will use your offer in case the problem will repeat in future.
LM5Lp, firmware: 2018.08.22 and 2021.12.15, FlashSYS v2, ARMv7 Processor rev 5 (v7l), kernel 4.4.151 and 4.4.259
Reply


Forum Jump: