This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm that you accept these cookies being set.

PT1000 Temperature and LM3 reactor
#1
Hi,

how do I add a LM3 reactor connection with a PT1000 temperature sensor?

Thanks!!
Reply
#2
(08.07.2017, 12:22)managementboy Wrote: Hi,

how do I add a LM3 reactor connection with a PT1000 temperature sensor?

Thanks!!

HI! Connect your PT1000 sensor between GND and Resistive input №1 (for example). Go to Logic machine -> Reactor tab, click on RI1 row, set group address, set "send delta" and press SAVE. then it should work correct
Reply
#3
Reactor v3 has no Resistive inputs. You can try connecting it shown on this picture: https://en.wikipedia.org/wiki/Voltage_di...ve_divider
Where R1 is PT1000 sensor, R2 is fixed 1K resistor, Vin goes to 24V, Vout goes to Analog input. This way you can calculate sensor's resistance and convert it to temperature.
Reply


Forum Jump: