This forum uses cookies
This forum makes use of cookies to store your login information if you are registered, and your last visit if you are not. Cookies are small text documents stored on your computer; the cookies set by this forum can only be used on this website and pose no security risk. Cookies on this forum also track the specific topics you have read and when you last read them. Please confirm whether you accept or reject these cookies being set.

LogicMachine5 Reactor IO v2
#1
LogicMachine5 Reactor IO v2 is all-in-one cross-standard controller uniting in one device gateway functionality, cloud service integration, complex network logic engine, easy-to create visualization platform, IP Router, I/Os and much more.

v2 differs from initial v1 with possibility to use inputs for pulse metering, plus V2 has 2 analog outputs and 1-wire on board 

Hightlights:           
  • 18 I/O ports
  • LM5 Reactor IO v2 has built-in KNX TP1, EnOcean bi-directional interface (optional), two serial interfaces
    Power-over-Ethernet powering
  • Application development and application store
  • Cloud ready device with Microsoft Azure, Amazon Web Services and other services supported
  • Gateway and uniform way of control of KNX, ModBus RTU/TCP, BACnet IP, EnOcean (optional), DMX, M-Bus, GSM and more
  • Unlimited scenario and logic engine
  • Unlimited visualization platform for PC and for touch devices
  • Size: 6 DIN units
  • Remote KNX bus control and KNX device reprogramming
  • Object logging with trends support and data exporting to external servers
  • Optional 3x more powerful CPU than all previous LogicMachine versions
[Image: LM5-RIOE2-300x263.png]

See here i.MX28 (CPU of LM2, LM3, LM4) and i.MX6 (optional 3x speed CPU for LM5 series devices) comparison tests: http://openrb.com/imx28-vs-imx6-cpu-test...icmachine/
Here is more information on LM5 Reactor IO v2: http://openrb.com/logicmachine5-reactor-io-v2/
LM comparison table: http://openrb.com/wp-content/uploads/201...17_web.pdf
Reply
#2
Hy,
I was update firmware "LogicMachine5 Power / LogicMachine5 Reactor IO Power" and now can't see reactor tab with inputs and outputs.
Reply


Forum Jump: