Mosaic 2.0 what's new
#1
Hello!

You are often doing Mosaic 2.0 update. Sometimes not possible to recognize, what was changed.
Where to see changes/what's new information of each update?
Reply
#2
Reminder!

You are often doing Mosaic 2.0 update. Sometimes not possible to recognize, what was changed.
Where to see changes/what's new information of each update?
Reply
#3
(28.12.2017, 19:20)GenaV Wrote: Reminder!

You are often doing Mosaic 2.0 update. Sometimes not possible to recognize, what was changed.
Where to see changes/what's new information of each update?

Hi
In did we should post the updates :Smile
We corrected Air Conditioner widget to use correct DPT like for temperature.
There is new Video widget where you can play some web video. It can also be used for IP camera. You can see there 2 URLs one for local and second for remote which will be used in Mosaic Cloud. 
We are working on new solution for IP cameras and this will be part of it.

BR
Reply
#4
Hi Daniel,

Great to see some updates for mosaic :-)

As for the video widget, what type of url's need to be configured ?
-jpg
-mpeg
-mxpeg (mobotix)

Thanks
Nicky
Reply
#5
(30.12.2017, 22:42)npinguin Wrote: Hi Daniel,

Great to see some updates for mosaic :-)

As for the video widget, what  type of url's need to be configured ?
-jpg
-mpeg
-mxpeg (mobotix)

Thanks
Nicky
Hi
We are still limited to what the browser can display. Tested jpeg, mjpeg, mp4. You can try mxpeg and let us know. 
BR
Reply
#6
Thanks Daniel

I got the following working

Mobotix t25 cam
-http://MYIP/cgi-bin/faststream.jpg?stream=full&fps=0&data=v.mjpg

Axis m1065 Cam
- http://MYIP/axis-cgi/mjpg/video.cgi

But I got a problem with the security:
-need to provide the credentials of each Cam to get it working.
- Unfortunately I cannot provide the username password in the url (http://username:password@url), because then it cannot connect

If I would build a solution, I would recommend
- a dedicated solution integrated in the LM based on FFmpeg
- ability to configure Cam’s and views
- api’s to control the different cam’s and streams/views
- streaming and snapshot mode

have a look at netcamviewer monitor
Reply
#7
(31.12.2017, 14:45)npinguin Wrote: Thanks Daniel

I got the following working

Mobotix t25 cam
-http://MYIP/cgi-bin/faststream.jpg?stream=full&fps=0&data=v.mjpg

Axis m1065 Cam
- http://MYIP/axis-cgi/mjpg/video.cgi

But I got a problem with the security:
-need to provide the credentials of each Cam to get it working.
- Unfortunately I cannot provide the username password in the url (http://username:password@url), because then it cannot connect

If I would build a solution, I would recommend
- a dedicated solution integrated in the LM based on FFmpeg
- ability to configure Cam’s and views
- api’s to control the different cam’s and streams/views
- streaming and snapshot mode

have a look at netcamviewer monitor
Hi
Similar solution we are working on now.
BR
Reply
#8
Excellent, mind reading  Smile
Reply
#9
Hi
In latest version we corrected security widget and now when code is typed the window opens in popup. Due to this buttons are much bigger and easier to press.
BR
Reply
#10
Great Daniel, indeed much easier to use
Reply


Forum Jump: