(13.06.2016, 09:02)admin Wrote: You can also replace [0].innerHTML with jQuery's .html()

(13.06.2016, 09:36)buuuudzik Wrote: You are very wise

(13.06.2016, 12:21)buuuudzik Wrote: Maybe you can describe in very simple way how to:
- read from object database value of some group address,
- write to object database value of some group address(with or without write to the bus),
- read some additional object's info like "updatetime".


And also if there is a possibility to prepare the OR and AND gates for a few objects for calculating the room statuses and central statuses or something else.

(13.06.2016, 13:09)Erwin van der Zwart Wrote:

(13.06.2016, 12:21)buuuudzik Wrote: Maybe you can describe in very simple way how to:
- read from object database value of some group address,
- write to object database value of some group address(with or without write to the bus),
- read some additional object's info like "updatetime".


And also if there is a possibility to prepare the OR and AND gates for a few objects for calculating the room statuses and central statuses or something else.

Hi Buuuudzik,

All your questions are possible and are used in many of the custom JavaScript samples on this forum.

Please try to create some scripts based on those samples. I'm happy to give samples / solutions that are not on the forum yet.

The idea is that the users are helped with our samples, not to do the work for them (;

Why do you want to create the logic client side? The logic won't work when visu is not active. I would advice to keep logic server side with LUA

Here are the answers on your question:

 // Look at possible values from objects (updatetime is not there) It's possible to get that info when using a APP with .lp files but not from Custom Javascript
 console.log(objectStore.objects) 
 
 // Get values from object(s)
 value = objectStore.objects[Scada.encodeGroupAddress('1/1/3')].value
 value1 = objectStore.objects[Scada.encodeGroupAddress('1/1/3')].value
 name = objectStore.objects[Scada.encodeGroupAddress('1/1/3')].name
 
 console.log(value)
 console.log(name)
 
 // Write to object
 var id = Scada.encodeGroupAddress('1/1/3'), obj = objectStore.objects[ id ], value = 10;
 setObjectValue({ address: obj.address , rawdatatype: obj.rawdatatype }, value, "text");
 
 // AND fuction
 if ( value == 1 && value1 == 1 ) {
   // dosomething)
 }
 
 // OR function
 if ( value == 1 || value1 == 1 ) {
   // dosomething)
 }

BR,

Erwin

(13.06.2016, 14:09)Erwin van der Zwart Wrote: Hi Buuuudzik,

I would definitly check your scripts, we use our controller for buildings up to 20 floors where we have approx 500 KNX devices behind each controller (as zone coupler) and those have much more data then a single house. We run all scripts server side...

Also be aware when you open your visu on multiple locations your logic runs multiple times, don't write to the controller on those cases, but keep client side logic inside visu only.

BR,

Erwin

(13.06.2016, 19:59)PErwin van der Zwart Wrote: Hi Buuuudzik,

I think the iterate of the result table is taking a lot of resources, especially when having the execution of multiple scripts in parallel from the tag group

You could try to do it with a direct query from DB to avoid the table iterate and speed up things a bit.

Code:

function tag_or(tag)
 local result = db:getall('SELECT id FROM objects WHERE datahex = "01" AND tagcache LIKE "%' .. tag .. '%"')
 if #result == 0 then
   return false
 else
   return true
 end
end

You can also add this script in the start of your script to kill previous script when executed multiple times in parallel.

Code:

--check for earlier started scrips
storagename = 'TAG_OR' -- Must be unique for every script

--check storage for tpid value
tpid = storage.get(storagename)  

--check if tpid has a value
if tpid == nil then
 pid = os.getpid()
 storage.set(storagename, pid)
else
 pid = os.getpid()  
 -- create new pid for next time to kill
 storage.set(storagename, pid)
 -- kill earlier running script    
 os.kill(tpid, signal.SIGKILL)
end

If this doesn't do the trick you can use the semaphore library making it possible to block parallel execution of scripts

See http://openrb.com/docs/semaphore.htm

BR,

Erwin van der Zwart

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

(24.06.2016, 10:31)AdriSaliai Wrote: Where is the new firmware for downloading?????

(13.06.2016, 06:27)buuuudzik Wrote:

(12.06.2016, 22:36)Erwin van der Zwart Wrote: Hi Buuudzik,

Here is a sample for changing color with css based on setpoint and actual value difference.

Give the first setpoint these additional classes 'Setp Setp_1', the 2nd 'Setp Setp_2', the 3th 'Setp Setp_3' etc
Give the first actual these additional classes 'Temp Temp_1', the 2nd 'Temp Temp_2', the 3th 'Temp Temp_3' etc  

So all setpoints will have 2 additional classes (Setp and Setp_nr) and all actuals will have 2 additional classes (Temp and Temp_nr)

Put this code in your custom JavaScript:

Code:

$(function(){
 
 // Set color values
 var defaultcolor = $('.Temp').css("color")
 var highcolor = 'rgb(0, 255, 0)'
 var lowcolor = 'rgb(128, 128, 255)'
 
 // Function to change colors on values
 function CheckSetpointandValue(){
   
   // Set conditions for Setp_1 and Temp_1
   if  ( $(".Temp_1")[0].innerHTML ==  $(".Setp_1")[0].innerHTML){
       $(".Temp_1").css("color", defaultcolor);
   } else if ( $(".Temp_1")[0].innerHTML > $(".Setp_1")[0].innerHTML){
       $(".Temp_1").css("color", highcolor);
   } else if ( $(".Temp_1")[0].innerHTML < $(".Setp_1")[0].innerHTML){
       $(".Temp_1").css("color", lowcolor);
   }
   
   // Set conditions for Setp_2 and Temp_2
   if  ( $(".Temp_2")[0].innerHTML ==  $(".Setp_2")[0].innerHTML){
       $(".Temp_2").css("color", defaultcolor);
   } else if ( $(".Temp_2")[0].innerHTML > $(".Setp_2")[0].innerHTML){
       $(".Temp_2").css("color", highcolor);
   } else if ( $(".Temp_2")[0].innerHTML < $(".Setp_2")[0].innerHTML){
       $(".Temp_2").css("color", lowcolor);
   }
   
   // Set conditions for Setp_3 and Temp_3
   if  ( $(".Temp_3")[0].innerHTML ==  $(".Setp_3")[0].innerHTML){
       $(".Temp_3").css("color", defaultcolor);
   } else if ( $(".Temp_3")[0].innerHTML > $(".Setp_3")[0].innerHTML){
       $(".Temp_3").css("color", highcolor);
   } else if ( $(".Temp_3")[0].innerHTML < $(".Setp_3")[0].innerHTML){
       $(".Temp_3").css("color", lowcolor);
   }
   
 }  
 
 // Check for changes on value of item with Temp
 $('.Temp').bind("DOMSubtreeModified",function(){
   CheckSetpointandValue();
 });
 
 // Check for changes on value of item with Setp
 $('.Setp').bind("DOMSubtreeModified",function(){
   CheckSetpointandValue();
 });
 
 // Initial execution
 CheckSetpointandValue();
 
});

All items with additional class 'Setp' and 'Temp' are monitored on changes and wil execute the function. Based on values the css of the correct item (Temp_nr) will be changed

If you have more then 3 items then you need to add them inside the function CheckSetpointandValue().

BR,

Erwin van der Zwart

Very nice function