+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: Announcements (https://forum.logicmachine.net/forumdisplay.php?fid=7)
+--- Forum: Software updates (https://forum.logicmachine.net/forumdisplay.php?fid=13)
+--- Thread: [OLD] LogicMachine firmware 2017.06 (/showthread.php?tid=857)
RE: [RELEASE] LogicMachine firmware 2017.06 - simen@saasprosjekt.no - 19.10.2020
Hello,
I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".
The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why).
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
RE: [RELEASE] LogicMachine firmware 2017.06 - Daniel - 19.10.2020
(19.10.2020, 10:29)simen@saasprosjekt.no Wrote: Hello,Your card is probably in read only mode and needs replacement.
I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".
The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why).
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
RE: [RELEASE] LogicMachine firmware 2017.06 - simen@saasprosjekt.no - 19.10.2020
(19.10.2020, 11:45)Daniel. Wrote:(19.10.2020, 10:29)simen@saasprosjekt.no Wrote: Hello,Your card is probably in read only mode and needs replacement.
I am struggling with updating, the LM says "Cannot upgrade, firmware image file is invalid".
The reason i want to upgrade the firmware is that the device wont import new addresses from ETS via a ETS export anymore, I need to to that manually (dont know why).
I have tried running the script for updating, but not sure if I am doing it the right way since nothing changes.
What card? The LM was installed 2 years ago, and last week we were going to implement som changes in the KNX group adresses and need those exported to BACnet.
RE: [RELEASE] LogicMachine firmware 2017.06 - admin - 19.10.2020
Check that firmware is meant for the hardware that you have
RE: [RELEASE] LogicMachine firmware 2017.06 - simen@saasprosjekt.no - 19.10.2020
(19.10.2020, 11:49)admin Wrote: Check that firmware is meant for the hardware that you have
It is a LM5 lite from 2018, i have tried all off the LM5 FW, all of them says the same error message a couple of seconds after i try to upload the FW.
RE: [RELEASE] LogicMachine firmware 2017.06 - admin - 19.10.2020
LM5 can have either old or new cpu, which fw exactly have you tried?
RE: [RELEASE] LogicMachine firmware 2017.06 - simen@saasprosjekt.no - 19.10.2020
(19.10.2020, 11:56)admin Wrote: LM5 can have either old or new cpu, which fw exactly have you tried?
turns out i tried the same FW as the product already had installed..
I tried now with the "pre-release", that seems to be updating now.
Hope this solves the import problem from ETS.