Logic Machine Forum
Modbus profiles examples - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Modbus profiles examples (/showthread.php?tid=839)

Pages: 1 2 3 4 5 6

RE: Modbus profiles examples - Sjef de Laat - 29.09.2024

Hello everyone,

does anybody have the profile for the energymeter from ABB B23 112-10M?

Huawey Modbus TCP json - CristianAgata - 06.10.2024

Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

RE: Modbus profiles examples - Tuwat47 - 25.10.2024

Good morning Community,
I want to share for all user an Caleffi Conteca modbus profile and pdf useful for solve any doubt.

All the contributes are welcome.

Best regards,
Mirko

RE: Modbus profiles examples - Novodk - 20.11.2024

(29.09.2024, 20:42)Sjef de Laat Wrote: Hello everyone,

does anybody have the profile for the energymeter from ABB B23 112-10M?

Did you get the profile for that meter?

RE: Modbus profiles examples - admin - 21.11.2024

If you need a profile for ABB B23 112-10M then we can help with creating it.

RE: Huawey Modbus TCP json - CristianAgata - 05.01.2025

(06.10.2024, 13:02)CristianAgata Wrote: Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

RE: Huawey Modbus TCP json - atomi23 - 09.01.2025

(05.01.2025, 10:42)CristianAgata Wrote:
(06.10.2024, 13:02)CristianAgata Wrote: Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

RE: Huawey Modbus TCP json - CristianAgata - 09.01.2025

(09.01.2025, 16:19)atomi23 Wrote:
(05.01.2025, 10:42)CristianAgata Wrote:
(06.10.2024, 13:02)CristianAgata Wrote: Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

Try this

RE: Huawey Modbus TCP json - atomi23 - 09.01.2025

(09.01.2025, 16:28)CristianAgata Wrote:
(09.01.2025, 16:19)atomi23 Wrote:
(05.01.2025, 10:42)CristianAgata Wrote:
(06.10.2024, 13:02)CristianAgata Wrote: Good morning Community,
I want to share for all user an Huawey Sun2000 modbus profile.
Tested with a 20 sec of polling and it works.
All the contributes are welcome.
Best regards Cristian

Hi everybody,
I post a little update to the profile with some fixed point.
BR Cristian

Thanks for sharing but i got invalit profile error if i import triface , but mono works

Try this

Thanks for your Work it works now Wink Ok now i have to test it on my installation Wink ( it will take some time becouse of the weather at the moment Wink

RE: Modbus profiles examples - kyriakos@webros.gr - 11.01.2025

Hello,
I am trying to connect my Gree Versati IV heat pump with LogicMachine Reactor through Modbus. I can read the values of registers from Read Test button on modbus tab inside the interface of logicmachine. I would like some help to make the rest procedure to get these values on the knx bus.
Thank you.

RE: Modbus profiles examples - Daniel - 13.01.2025

(11.01.2025, 06:36)kyriakos@webros.gr Wrote: Hello,
I am trying to connect my Gree Versati IV heat pump with LogicMachine Reactor through Modbus. I can read the values of registers from Read Test button on modbus tab inside the interface of logicmachine. I would like some help to make the rest procedure to get these values on the knx bus.
Thank you.

Create separate thread for this and we can help you start.

RE: Modbus profiles examples - AlexLV - 12.02.2025

Hi,
my basic profile and info I found about Sungrow inverter SH8.0RT-V112.
Will update more a bit later. Also found that some data has different names in pdf file and iSolarCloud app (from Sungrow). Some of data  in iSolarCloud  is just sum of some other parameters.. We can discuss it later, I have a site with this device.
.pdf   Communication Protocol of Residential Hybrid Inverter-V1.1.5.pdf (Size: 432.13 KB / Downloads: 10)
.json   SunGrow_.json (Size: 4.82 KB / Downloads: 11)


BR,

Alexander

RE: Modbus profiles examples - Sjef de Laat - 19.02.2025

(21.11.2024, 13:37)admin Wrote: If you need a profile for ABB B23 112-10M then we can help with creating it.

Hello tank you,

I now made it with your modbus generator and it works perfectly now

RE: Modbus profiles examples - FatMax - 17.03.2025

Someone asked for a Profile for PowerTag I/O module.

For the control object, ON = 2. OFF = 1.

For the status object, 0 = false, 1 = true

.json   Arkitecht_PowerTagIo.json (Size: 383 bytes / Downloads: 9)


RE: Modbus profiles examples - Ranjeet - 31.03.2025

Dear Sir ,

We Have Installed KNX System With Logic Machine .Scada Team Wants to Operate Light with Scene Group Address from Modbus RS485 From Logic Machine They Need Mapped group Address, Baud rate, parity, Addresses form us. How do we map 1bit and 1 byte group address to Logic machine. can you provide json profile for light group address where we map that group address.

RE: Modbus profiles examples - Daniel - 31.03.2025

Please always create new thread when asking question not related to the topic.
Most likely you need this:
https://kb.logicmachine.net/integration/modbus-rtu-tcp-slave/

RE: Modbus profiles examples - provodkapro - 01.04.2025

(10.03.2023, 10:12)pritorianz Wrote: Hi all!
I made and checked the profile for the Haier YCJ-A002 module (for connecting Haier air conditioners via Modbus).
For writing, I used the site https://jsoneditoronline.org/
And modbus profile generator https://forum.logicmachine.net/showthread.php?tid=3053&pid=19678#pid19678

Hi!

I made almost the same profile, and then found yours.  Big Grin

I added multiple writes, hid the air conditioner number (according to the documentation it is always 0, so I set the mode to "internal") and changed "bus_datatype" to "temperature" in the corresponding addresses.

RE: Modbus profiles examples - Daniel - 01.04.2025

(01.04.2025, 08:26)provodkapro Wrote:
(10.03.2023, 10:12)pritorianz Wrote: Hi all!
I made and checked the profile for the Haier YCJ-A002 module (for connecting Haier air conditioners via Modbus).
For writing, I used the site https://jsoneditoronline.org/
And modbus profile generator https://forum.logicmachine.net/showthread.php?tid=3053&pid=19678#pid19678

Hi!

I made almost the same profile, and then found yours.  Big Grin

I added multiple writes, hid the air conditioner number (according to the documentation it is always 0, so I set the mode to "internal") and changed "bus_datatype" to "temperature" in the corresponding addresses.

Next time use this:
https://forum.logicmachine.net/showthread.php?tid=5911

RE: Modbus profiles examples - kgroenhoej - 06.04.2025

Profile for Genvex Optima 251

RE: Modbus profiles examples - nhemtman - 15.04.2025

Hi

Can someone help me? Huh Huh

It's about the Pego refrigerator's modbus integration. Pego communicates with RTU 2-wire. Both W4K and Pego have 120 ohm termination resistors.
Pego is the only device in the RTU.
The following registers are in use:

- 256 int16
- 768 int16
- 1280 (Bitmap)
- 1281 (Bitmap)
- 1282 (Bitmap)

Modbus reports random CRC and read errors
I tried to read values with the read test, but I don't get an error message then. What can I do next? What could be wrong with the Modbus profile?
Attached: Pego modbus instructions (pdf) and a created modbus profile (json)