(16.12.2016, 15:38)I\m new to these issues and I'm not clear how to run the function you describe inside the device.I do not know what command you have to put in order to run it.I want to press a button that throws me a true, I put knx variables in true or false depending, which I have achieved, but I also want to send me to another page and there is where I do not know how to execute this function. If you could help me I would appreciate it. Wrote:

(16.12.2016, 14:58)admin Wrote: Please post in English next time
The task is to show a specific plan depending on a certain object value.

Code:

$(function(){
 if (typeof grp != 'undefined') {
   grp.listen('1/1/1', function(object, state) {
     var value = object.value;
     if (state == 'value') {
       if (value == 1) {
         showPlan(11);
       }
       else if (value == 2) {
         showPlan(12);
       }
       else if (value == 3) {
         showPlan(13);
       }
     }
   });
 }
});

Thank you very much. As it is applied to the "Touch"?

(15.04.2016, 08:31)Erwin van der Zwart Wrote: We can now create buttons with short / long press detection and send a value on press / release by adding some functions into the custom javascript.

Add content of the custom Javascript below into the custom javascript section as showed in the example of Edgars

For scene button(s) with default long push time detection after 3 seconds:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: scenebutton normalpressed_0 longpressed_128
3) Change the value after normalpressed_xx or longpressed_xx into your wanted value for each different button between 0 and 255

For scene button(s) with custom long push time detection after x seconds:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: scenebutton normalpressed_0 longpressed_128 longpresstime_20
3) Change the value after normalpressed_xx or longpressed_xx into your wanted value for each different button between 0 and 255
4) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

For doorbell button by bit object:
1) Create a 1 bit unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: doorbellbutton_bit released_0 pressed_1 
3) Optional flip the value after released_x and pressed_x into your wanted value for each different button between 0 and 1

For doorbell button by byte object:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: doorbellbutton_byte released_0 pressed_255
3) Optional change the value after released_xxx and pressed_xxx into your wanted value for each different button between 0 and 255

For screen button by 1x bit move object and 1x bit step/stop object:
1) Create 2 1 bit unsigned objects and create button(s) in your visu with move object as main object and step/stop object as status-object and use same image on 1 and 0
2) Enter in the additional class of the UP button(s) these classes: screenbuttonup longpresstime_15 the values 0 and 1 are hardcoded and follows the KNX standard.
2) Enter in the additional class of the DOWN button(s) these classes: screenbuttondown longpresstime_15 the values 0 and 1 are hardcoded and follows the KNX standard.
3) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

For dimming button by 1x 3 bit dimming object and 1x bit switch object:
1) Create a 3 bit dim/blind (3.007) object and a 1 bit bit unsigned object and create button(s) in your visu with dim object as main object and switch object as status-object and use same image on 1 and 0
2) Enter in the additional class of the BRIGHTER button(s) these classes: dimbuttonup longpresstime_15 the values 9/1 and 8/0 are hardcoded and follows the KNX standard.
2) Enter in the additional class of the DARKER button(s) these classes: dimbuttondown longpresstime_15 the values 1/0 and 0/0 are hardcoded and follows the KNX standard.
3) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

Thats all you need to do (:

Have fun!

BR,

Erwin van der Zwart

---

Add this code into your custom JavaScript:

Code:

$(function() {  
 
  // Declare variables for timers
  var longpushtime, defaultlongpushtime = 30, intervaltime = 100, timer = 0, timerInterval, pressstatus, presstype;

  function sendvalue(addr, value, typemajor, typeminor) {
    var id = Scada.encodeGroupAddress(addr), obj = objectStore.objects[ id ];
    if (obj && obj.datatype.major == typemajor && obj.datatype.minor == typeminor) {
      setObjectValue({ address: obj.address , rawdatatype: obj.rawdatatype }, value, "text");
    }
  }

  // Function to get values from bit object with additional classnames
  function getconfig(el, prefix, minval, maxval) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = 0;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(minval, res);
    res = Math.min(maxval, res);
    return res;
  }
  
  // Function to get pushtime values from additional classnames
  function getpushtime(el, prefix) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = defaultlongpushtime;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(0, res);
    res = Math.min(1000, res);
    return res;
  }
  
  // Function to get pushtime values for screen from additional classnames
  function getpushtimescreen(el, prefix) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = 2;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(0, res);
    res = Math.min(1000, res);
    return res;
  }
  
  // Function to remove the status object for doorbell function(s)
  function removelistener(src) {
   var el = $(src) // source element reference
     , addr = el.data('status-object') // group address of status object
     , id = Scada.encodeGroupAddress(addr) // address to id
     , obj = objectStore.objects[ id ]; // get object's store reference
   if (obj) {
     // find listener that is attached to the source element
     $.each(obj.listeners, function(index, listener) {
       // remove the listener
       if (listener.bind.el && el.is(listener.bind.el)) {
         obj.listeners.splice(index, 1);
       }
     });
   }
    }

  // Remove original events and add new press events
  $(".scenebutton")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed'
      presstype = 'normal';
      var btnthis = $(this), objthis = btnthis.data("object"),
        longpushtime = getpushtime(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          presstype = 'long';
          return;
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function(e) {
      if (pressstatus == 'pressed'){
        var btnthis = $(this), objthis = btnthis.data("object"),
        longpushtime = getpushtime(this, "longpresstime");
        clearInterval(timerInterval);
        if (presstype == 'normal') {
          normalpressvalue = getconfig(this, "normalpressed", 0, 255);
          sendvalue(objthis, normalpressvalue, 5, 0);
        } else {
          longpressvalue = getconfig(this, "longpressed", 0, 255);
          sendvalue(objthis, longpressvalue, 5, 0);
        }
        btnthis.css("opacity", 1);
        timer = 0;
        presstype = 'normal';
        pressstatus = 'released';
      }
  });
  
  // Remove original events and add new press events
  $(".doorbellbutton_bit")
    .off("vclick")
    .on("vmousedown", function() {
      var btnthis = $(this), objthis = btnthis.data("object"),
      pressedvalue = getconfig(this, "pressed", 0, 1);
      removelistener(btnthis);
      sendvalue(objthis, pressedvalue, 1, 0);
      pressstatus = 'pressed';
    })
    .on("vclick vmouseout touchend", function() {
      if (pressstatus == 'pressed'){
          var btnthis = $(this), objthis = btnthis.data("object"),
          releasevalue = getconfig(this, "released", 0, 1);
          sendvalue(objthis, releasevalue, 1, 0);
      }
      pressstatus = 'released';
   });
  
  // Remove original events and add new press events
  $(".doorbellbutton_byte")
    .off("vclick")
    .on("vmousedown", function() {
      var btnthis = $(this), objthis = btnthis.data("object"),
      pressedvalue = getconfig(this, "pressed", 0, 255);
      removelistener(btnthis);
      sendvalue(objthis, pressedvalue, 5, 0);
      pressstatus = 'pressed'
    })
    .on("vclick vmouseout touchend", function() {
            if (pressstatus == 'pressed'){      
            var btnthis = $(this), objthis = btnthis.data("object"),
          releasevalue = getconfig(this, "released", 0, 255);
          sendvalue(objthis, releasevalue, 5, 0);
      }
        pressstatus = 'released';
   });
  
    // Remove original events and add new press events
      $(".screenbuttonup")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), longpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objmove, longpressvalue, 1, 0);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), normalpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objstop, normalpressvalue, 1, 0);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".screenbuttondown")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), longpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objmove, longpressvalue, 1, 0);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), normalpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objstop, normalpressvalue, 1, 0);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".dimbuttonup")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objbrighter = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 9;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objbrighter, longpressvalue, 3, 7);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objbrighter = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 8, normalpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objswitch, normalpressvalue, 1, 0);
      } else if (pressstatus == 'pressed' && timer >= longpushtime) {
        sendvalue(objbrighter, longpressvalue, 3, 7);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".dimbuttondown")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objdarker = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objdarker, longpressvalue, 3, 7);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objdarker = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 0, normalpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objswitch, normalpressvalue, 1, 0);
      } else if (pressstatus == 'pressed' && timer >= longpushtime) {
        sendvalue(objdarker, longpressvalue, 3, 7);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
    });
 
});

(04.05.2017, 16:28)Erwin van der Zwart Wrote: Hi,

Dimming is only possible by two buttons, one for up and one for down. Just like KNX push buttons.

Use the classes dimbuttonup and dimbuttondown to do that (see explaination)

BR,

Erwin

(15.04.2016, 08:31)Erwin van der Zwart Wrote: We can now create buttons with short / long press detection and send a value on press / release by adding some functions into the custom javascript.

Add content of the custom Javascript below into the custom javascript section as showed in the example of Edgars

For scene button(s) with default long push time detection after 3 seconds:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: scenebutton normalpressed_0 longpressed_128
3) Change the value after normalpressed_xx or longpressed_xx into your wanted value for each different button between 0 and 255

For scene button(s) with custom long push time detection after x seconds:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: scenebutton normalpressed_0 longpressed_128 longpresstime_20
3) Change the value after normalpressed_xx or longpressed_xx into your wanted value for each different button between 0 and 255
4) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

For doorbell button by bit object:
1) Create a 1 bit unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: doorbellbutton_bit released_0 pressed_1 
3) Optional flip the value after released_x and pressed_x into your wanted value for each different button between 0 and 1

For doorbell button by byte object:
1) Create a 1 byte unsigned object and create button(s) in your visu with this main object.
2) Enter in the additional class of the button(s) these classes: doorbellbutton_byte released_0 pressed_255
3) Optional change the value after released_xxx and pressed_xxx into your wanted value for each different button between 0 and 255

For screen button by 1x bit move object and 1x bit step/stop object:
1) Create 2 1 bit unsigned objects and create button(s) in your visu with move object as main object and step/stop object as status-object and use same image on 1 and 0
2) Enter in the additional class of the UP button(s) these classes: screenbuttonup longpresstime_15 the values 0 and 1 are hardcoded and follows the KNX standard.
2) Enter in the additional class of the DOWN button(s) these classes: screenbuttondown longpresstime_15 the values 0 and 1 are hardcoded and follows the KNX standard.
3) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

For dimming button by 1x 3 bit dimming object and 1x bit switch object:
1) Create a 3 bit dim/blind (3.007) object and a 1 bit bit unsigned object and create button(s) in your visu with dim object as main object and switch object as status-object and use same image on 1 and 0
2) Enter in the additional class of the BRIGHTER button(s) these classes: dimbuttonup longpresstime_15 the values 9/1 and 8/0 are hardcoded and follows the KNX standard.
2) Enter in the additional class of the DARKER button(s) these classes: dimbuttondown longpresstime_15 the values 1/0 and 0/0 are hardcoded and follows the KNX standard.
3) Change the value after longpresstime_xx to the wanted long push time (xx (value) * 0.1second) = seconds for long push time

Thats all you need to do (:

Have fun!

BR,

Erwin van der Zwart

---

Add this code into your custom JavaScript:

Code:

$(function() {  
 
  // Declare variables for timers
  var longpushtime, defaultlongpushtime = 30, intervaltime = 100, timer = 0, timerInterval, pressstatus, presstype;

  function sendvalue(addr, value, typemajor, typeminor) {
    var id = Scada.encodeGroupAddress(addr), obj = objectStore.objects[ id ];
    if (obj && obj.datatype.major == typemajor && obj.datatype.minor == typeminor) {
      setObjectValue({ address: obj.address , rawdatatype: obj.rawdatatype }, value, "text");
    }
  }

  // Function to get values from bit object with additional classnames
  function getconfig(el, prefix, minval, maxval) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = 0;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(minval, res);
    res = Math.min(maxval, res);
    return res;
  }
  
  // Function to get pushtime values from additional classnames
  function getpushtime(el, prefix) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = defaultlongpushtime;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(0, res);
    res = Math.min(1000, res);
    return res;
  }
  
  // Function to get pushtime values for screen from additional classnames
  function getpushtimescreen(el, prefix) {
    var reg = new RegExp(prefix + "_(\\d+)"), matches = el.className.match(reg), res = 2;
    if (matches) {
      res = parseInt(matches[ 1 ], 10) || 0;
    }
    res = Math.max(0, res);
    res = Math.min(1000, res);
    return res;
  }
  
  // Function to remove the status object for doorbell function(s)
  function removelistener(src) {
   var el = $(src) // source element reference
     , addr = el.data('status-object') // group address of status object
     , id = Scada.encodeGroupAddress(addr) // address to id
     , obj = objectStore.objects[ id ]; // get object's store reference
   if (obj) {
     // find listener that is attached to the source element
     $.each(obj.listeners, function(index, listener) {
       // remove the listener
       if (listener.bind.el && el.is(listener.bind.el)) {
         obj.listeners.splice(index, 1);
       }
     });
   }
    }

  // Remove original events and add new press events
  $(".scenebutton")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed'
      presstype = 'normal';
      var btnthis = $(this), objthis = btnthis.data("object"),
        longpushtime = getpushtime(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          presstype = 'long';
          return;
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function(e) {
      if (pressstatus == 'pressed'){
        var btnthis = $(this), objthis = btnthis.data("object"),
        longpushtime = getpushtime(this, "longpresstime");
        clearInterval(timerInterval);
        if (presstype == 'normal') {
          normalpressvalue = getconfig(this, "normalpressed", 0, 255);
          sendvalue(objthis, normalpressvalue, 5, 0);
        } else {
          longpressvalue = getconfig(this, "longpressed", 0, 255);
          sendvalue(objthis, longpressvalue, 5, 0);
        }
        btnthis.css("opacity", 1);
        timer = 0;
        presstype = 'normal';
        pressstatus = 'released';
      }
  });
  
  // Remove original events and add new press events
  $(".doorbellbutton_bit")
    .off("vclick")
    .on("vmousedown", function() {
      var btnthis = $(this), objthis = btnthis.data("object"),
      pressedvalue = getconfig(this, "pressed", 0, 1);
      removelistener(btnthis);
      sendvalue(objthis, pressedvalue, 1, 0);
      pressstatus = 'pressed';
    })
    .on("vclick vmouseout touchend", function() {
      if (pressstatus == 'pressed'){
          var btnthis = $(this), objthis = btnthis.data("object"),
          releasevalue = getconfig(this, "released", 0, 1);
          sendvalue(objthis, releasevalue, 1, 0);
      }
      pressstatus = 'released';
   });
  
  // Remove original events and add new press events
  $(".doorbellbutton_byte")
    .off("vclick")
    .on("vmousedown", function() {
      var btnthis = $(this), objthis = btnthis.data("object"),
      pressedvalue = getconfig(this, "pressed", 0, 255);
      removelistener(btnthis);
      sendvalue(objthis, pressedvalue, 5, 0);
      pressstatus = 'pressed'
    })
    .on("vclick vmouseout touchend", function() {
            if (pressstatus == 'pressed'){      
            var btnthis = $(this), objthis = btnthis.data("object"),
          releasevalue = getconfig(this, "released", 0, 255);
          sendvalue(objthis, releasevalue, 5, 0);
      }
        pressstatus = 'released';
   });
  
    // Remove original events and add new press events
      $(".screenbuttonup")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), longpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objmove, longpressvalue, 1, 0);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), normalpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objstop, normalpressvalue, 1, 0);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".screenbuttondown")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), longpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objmove, longpressvalue, 1, 0);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objmove = btnthis.data("object"), 
      objstop = btnthis.data("status-object"), normalpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objstop, normalpressvalue, 1, 0);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".dimbuttonup")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objbrighter = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 9;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objbrighter, longpressvalue, 3, 7);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objbrighter = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 8, normalpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objswitch, normalpressvalue, 1, 0);
      } else if (pressstatus == 'pressed' && timer >= longpushtime) {
        sendvalue(objbrighter, longpressvalue, 3, 7);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
      });
  
    // Remove original events and add new press events
      $(".dimbuttondown")
    .off("vclick")
    .on("vmousedown", function() {
      pressstatus = 'pressed';
      var btnthis = $(this), objdarker = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 1;
        longpushtime = getpushtimescreen(this, "longpresstime");
      timerInterval = setInterval(function() {
        timer += 1;
        if (timer >= longpushtime) {
          btnthis.css("opacity", 0.5);
          clearInterval(timerInterval);
          sendvalue(objdarker, longpressvalue, 3, 7);
        }
      }, intervaltime);
    })
    .on("vclick vmouseout touchend", function() {
      var btnthis = $(this), objdarker = btnthis.data("object"), 
      objswitch = btnthis.data("status-object"), longpressvalue = 0, normalpressvalue = 0;
        longpushtime = getpushtimescreen(this, "longpresstime");
      clearInterval(timerInterval);
      if (pressstatus == 'pressed' && timer < longpushtime) {
        sendvalue(objswitch, normalpressvalue, 1, 0);
      } else if (pressstatus == 'pressed' && timer >= longpushtime) {
        sendvalue(objdarker, longpressvalue, 3, 7);
      }
      btnthis.css("opacity", 1);
      timer = 0;
      pressstatus = 'released';
    });
 
});

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

(10.12.2017, 10:04)baggins Wrote:

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

Hi,
I have two addresses, say '1/1/2' and '1/1/3' that I want to use to trigger the same showPlan. I have absolutely no knowledge of javascript, so how do I modify this code?
Is my understanding correct that this code gets executed whenever any address is triggered?

Thanks.

(11.12.2017, 10:28)Daniel. Wrote:

(10.12.2017, 10:04)baggins Wrote:

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

Hi,
I have two addresses, say '1/1/2' and '1/1/3' that I want to use to trigger the same showPlan. I have absolutely no knowledge of javascript, so how do I modify this code?
Is my understanding correct that this code gets executed whenever any address is triggered?

Thanks.

Hi
Just use the function twice.
BR

(11.12.2017, 11:06)baggins Wrote:

(11.12.2017, 10:28)Daniel. Wrote:

(10.12.2017, 10:04)baggins Wrote:

(13.04.2016, 11:27)edgars Wrote: In the firmware starting from 4.2016 there is Custom JavaScript feature available in LogicMachine --> Scripting --> Tools --> Edit custom JavaScript. 
It is possible to create different dynamic tasks, like detect short/long press from visualization using one icon (Erwin, will you please add your example here) or as in this example, we can open specific Floor/Plan when some grp address is triggered - useful e.g. when you want IP Camera page automatically to be opened when Intercom button is pressed:

Code:

$(function(){
 if (typeof objectStore !== 'undefined') {
   var id = Scada.encodeGroupAddress('1/1/2');

   objectStore.addListener(id, function(object, type) {
     if (type == 'value') {
       showPlan(69);
     }
   });
 }
});

showPlan() value can be get when you hover your mouse over specific plan name and click on the arrow. Please see in pictures attached.

Hi,
I have two addresses, say '1/1/2' and '1/1/3' that I want to use to trigger the same showPlan. I have absolutely no knowledge of javascript, so how do I modify this code?
Is my understanding correct that this code gets executed whenever any address is triggered?

Thanks.

Hi
Just use the function twice.
BR

That was actually the first thing I tried: I made an exact copy of the function and changed the address.
The copy did not execute.

There is something strange going on.
I did some further testing and this script only works with the address I initially did the testing with. If I change the address to something else, it does not work.
Do I have to clear a cache somewhere?

Thanks.