+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Scripting (https://forum.logicmachine.net/forumdisplay.php?fid=8)
+--- Thread: CanBus & LIN (/showthread.php?tid=1028)
CanBus & LIN - toujour - 06.10.2017
Interface ?
Script ?
I'd like to use a Logic Machine for automotive.....Can someone help me ?
Otherwise I will use other system..... ;(
Regards,
Alberto
RE: CanBus & LIN - admin - 06.10.2017
We have hardware with built-in CAN fault-tolerant interface. It's possible to access the bus via script. If you need CAN high-speed then you have to use something else.
RE: CanBus & LIN - toujour - 09.10.2017
I'm interested to it.
Can you send me a brochure or datasheet ?
Alberto
RE: CanBus & LIN - edgars - 10.10.2017
Hi Alberto!
please see attached some pre-information on the canX protocol which we have implemented on top of CAN FT physical layer.
We will adjust in upcoming time this file with more detailed information. There is also a presentation available at www.canx.info.
Also I attach sample datasheet for one of CAN FT products which we are doing (8 relay module). We plan to have the following CAN FT / canX products for the beginning:
System device:
- CAN-CAN repeater / router
- CAN 8 relay module
- CAN programmable 16 AI/DO module
- CAN Shutter actuator 2 channels, 4 pushbuttons
- CAN Flush-mounted 10-binary inputs / LED control
- CAN PWM control 8 channel
- CAN Wall sensor platform (stripped LogicMachine Ambient)
- CAN 0-10V dimmer 6 channels
- CAN-KNX transparent gateway
- CAN-DALI gateway
- LogicMachine5 Lite Power CAN
- LogicMachine5 with CAN and KNX
- LogicMachine5 Reactor (-s) with CAN
RE: CanBus & LIN - gjniewenhuijse - 10.10.2017
Nice.. Keep up the good work.
RE: CanBus & LIN - toujour - 10.10.2017
Is it compatible with canbus used in the car system ?