+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol (/showthread.php?tid=1224)
LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - batistacaceres - 06.02.2018
Hi Everyone:
I have a project with 10 knx lines, and inside each line I have connected an IPS/S 3.1.1 from abb, and all connected to and network switch. My question is: Can I get information from each knx lines using KNXnetIP tunneling with one logicmachine?? I dont want to connect the logicMachine in one of the KNX lines, in deed, I don want to use the TP knx connector in logicmachine, all connection must be IP.
The gol is use the logic machine to get humity information from diferents buildings, calculate certains parameters using specific formules and send back information each building using only KNXNetip tunneling protocol. I don want and I can not use routing because each building is in a separated network all aroud the world...
Is there any option to get information from diferents KNX Lines only using KNXnetIp tunneling protocol???.
best regards
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - admin - 07.02.2018
LM can only connect to a single gateway via tunneling. The only option for multiple devices on the same network is to use routers which support multicast.
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - batistacaceres - 07.02.2018
(07.02.2018, 13:47)admin Wrote: LM can only connect to a single gateway via tunneling. The only option for multiple devices on the same network is to use routers which support multicast.
Thank you very much ..
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - batistacaceres - 01.12.2020
Is there any implementation or library of the KNXNetIP tunneling protocol to get and send data from an LogicMachine to several devices KNXNetIP like IPS/S 3.1.1?.
We have ModbusTCP, BacnetIP, Http, DMX libraries, but we dont have any way to comunicate by KNXNetIP with severals KNXIP devices, Why???, Is it technically posible??. Sorry for my insistence.
Best regards, Roger
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - alexll - 03.03.2023
(01.12.2020, 11:02)batistacaceres Wrote: Is there any implementation or library of the KNXNetIP tunneling protocol to get and send data from an LogicMachine to several devices KNXNetIP like IPS/S 3.1.1?.
We have ModbusTCP, BacnetIP, Http, DMX libraries, but we dont have any way to comunicate by KNXNetIP with severals KNXIP devices, Why???, Is it technically posible??. Sorry for my insistence.
Best regards, Roger
Interested on this question. Any news about that?
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - kike - 10.03.2023
that would be great!! Is there any future improvement in this area?
RE: LogicMachine to link several buildings using only KNXnet/IP tunneling protocol - Daniel - 10.03.2023
No