+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: General (https://forum.logicmachine.net/forumdisplay.php?fid=2)
+--- Thread: Trendlogs are gone (/showthread.php?tid=1619)
Trendlogs are gone - jlfneira - 27.09.2018
Good afternoon.
I have a Schneider Spacelynk in an installation. It has 25 trendlogs working fine since a few weeks ago. Now 20 of then are empty and not registering anymore. Just five are working fine. I couldn't find any log nor error and really don't know how I can fix it, unless without erasind and loading again definitions. Maybe a sd card problem?
Thank you.
RE: Trendlogs ar e gone - Daniel - 28.09.2018
Hi
SD card problem would stop all trends not just some. Can you create new trend and see what happen?
How much memory do you use? Which FW?
BR
RE: Trendlogs ar e gone - buuuudzik - 28.09.2018
Do objects still exists? Maybe you deleted objects?
RE: Trendlogs ar e gone - jlfneira - 28.09.2018
Hi. I've just deleted one trend and created it again. It works flawlessly. All objects are ok. This problem happened weeks after end programming.
Actually I've just used 24% of total memory. Firmware is last version from Schneider: 2.3.0
RE: Trendlogs ar e gone - Daniel - 01.10.2018
Can you send your project backup to PM? I will check it out.
RE: Trendlogs ar e gone - admin - 01.10.2018
Each trend log is stored as a separate file so if there was a power outage during automatic project sync then some trend files can be lost. If you don't have a recent backup then the only solution is to delete and create missing trends again.
RE: Trendlogs ar e gone - jlfneira - 13.11.2018
(01.10.2018, 08:08)admin Wrote: Each trend log is stored as a separate file so if there was a power outage during automatic project sync then some trend files can be lost. If you don't have a recent backup then the only solution is to delete and create missing trends again.
Thank you. I've done this and it's working again.