Logic Machine Forum
What is canX and why do we need it? - Printable Version

+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: CANx (https://forum.logicmachine.net/forumdisplay.php?fid=23)
+--- Thread: What is canX and why do we need it? (/showthread.php?tid=1651)



What is canX and why do we need it? - Daniel - 12.10.2018

Hi

In this article you can see canX comparison with the KNX system. I tried to look on both technologies from my experience point of view. Feel free to share your comments a specially when you disagree with me :Smile
The article is here

Happy reading

BR

Daniel


RE: What is canX and why do we need it? - Kai-Roger - 12.10.2018

Hi.

I have one question that is very important to me and many others KNX fanatics. Do you plan on removing the KNX TP connection for all your gateways in the future?

BR.
Kai-Roger


RE: What is canX and why do we need it? - Daniel - 12.10.2018

(12.10.2018, 12:13)Kai-Roger Wrote: Hi.

I have one question that is very important to me and many others KNX fanatics. Do you plan on removing the KNX TP connection for all your gateways in the future?

BR.
Kai-Roger

Not at all. We will support KNX as long it will exist. canX is new additional technology which can co-exist together.


RE: What is canX and why do we need it? - Kai-Roger - 12.10.2018

(12.10.2018, 12:41)Daniel. Wrote:
(12.10.2018, 12:13)Kai-Roger Wrote: Hi.

I have one question that is very important to me and many others KNX fanatics. Do you plan on removing the KNX TP connection for all your gateways in the future?

BR.
Kai-Roger

Not at all. We will support KNX as long it will exist. canX is new additional technology which can co-exist together.

Will there then be different models so that one have to choose between KNX TP or CanX before purchase, og is the physical connection on the device programmable?


RE: What is canX and why do we need it? - Daniel - 12.10.2018

Yes there is LM just with canX or with both canX and KNX. We have also small canX-KNX gateway which can pass data between both systems.


RE: What is canX and why do we need it? - Kai-Roger - 12.10.2018

(12.10.2018, 12:51)Daniel. Wrote: Yes there is LM just with canX or with both canX and KNX. We have also small canX-KNX gateway which can pass data between both systems.

Ok. Good to hear... No i can go into the weekend with peace of mind  Sleepy


RE: What is canX and why do we need it? - edgars - 12.10.2018

here is the device with both interfaces on-board: LM5p-KC

[Image: LM5-KC.jpg]


RE: What is canX and why do we need it? - Kai-Roger - 12.10.2018

No KNX + CanX + Dali + 1-wire ?   Big Grin Big Grin


RE: What is canX and why do we need it? - edgars - 15.10.2018

not for now, but lets see. I think we will make some Reactor-type KNX+canX  Wink


RE: What is canX and why do we need it? - gjniewenhuijse - 15.10.2018

to be sure: canx and knx all need their own physical cable or can it still be combined?


RE: What is canX and why do we need it? - Daniel - 15.10.2018

(15.10.2018, 11:22)gjniewenhuijse Wrote: to be sure: canx and knx all need their own physical cable or can it still be combined?

Each bus need its own cable.