+- Logic Machine Forum (https://forum.logicmachine.net)
+-- Forum: LogicMachine eco-system (https://forum.logicmachine.net/forumdisplay.php?fid=1)
+--- Forum: Gateway (https://forum.logicmachine.net/forumdisplay.php?fid=10)
+--- Thread: Logic machine as bacnet ms/tp slave (/showthread.php?tid=2624)
Logic machine as bacnet ms/tp slave - Carlos Padilla - 05.05.2020
Good companions, I hope you are excellent. I am writing to tell you if it is possible with the logic machine, read the variables of a meter that is Bacnet IP and pass it to Bacnet ms / tp through the RS485 ports it has. I have read in several threads that the logic machine does not accept Bacnet ms / tp, but maybe with the new firmware changes that have been made, it may be possible, so that's why I'm asking. Thank you and I will be attentive to your comments
RE: Logic machine as bacnet ms/tp slave - Daniel - 05.05.2020
The only change in Bacnet were the bacnet units. Nothing new regarding MS/TP
RE: Logic machine as bacnet ms/tp slave - Carlos Padilla - 05.05.2020
Ok. Thank you.